1 1

Bomag

Bomag BW35 Trench Compactor Sn101012000121-101012001000 Parts Catalog

Bomag BW35 Trench Compactor Sn101012000121-101012001000 Parts Catalog

$16.99
$16.99
Sale Sold out
Shipping calculated at checkout.
Machine data plateRef 585051
Brand
Bomag
Equipment
Construction
Models covered
Bomag BW35
Format
PDF, searchable, print-ready
Delivery
Instant download after checkout
Language
English

What happens after you pay

  • Download link opens on the order page immediately
  • The same link is emailed to you — re-download any time
  • Open on phone, tablet or PC; print only the pages you need
  • Not sure it covers your serial range? Ask us before you buy
🏷️ Basic Information
Identification
Make:
Kubota
Engine family:
V3800-CR-TE4B / V3800-CR-TIE4B
Application:
Hyundai equipment (industrial / off-highway installation)
Engine type:
Four-cylinder, four-stroke, liquid-cooled diesel
Displacement:
3.769 L (230 cu in)
Emissions tier:
Tier 4 / EU Stage IIIB class, common-rail
Production years covered:
N/A - coverage follows the serial number ranges listed in the manual
👋 Introduction
Purpose
Target audience:
Diesel technicians, fleet maintenance shops, and experienced DIY owners servicing Hyundai machines powered by the Kubota V3800-CR series
Market position:
Kubota V3800-CR engines are a widely used industrial powerplant; this manual targets the Hyundai OEM installation and its service procedures
Advantage:
Consolidates engine mechanical, common-rail fuel, and control-system service data in one downloadable document instead of scattered OEM bulletins
Key features:
Common-rail fuel system, turbocharged and charge-air-cooled, four-valve-per-cylinder head, electronic engine control with diagnostics
📋 Manual Details
Manual Specification
Manual type:
Service and repair manual
Format:
PDF
Delivery:
Instant download
Binding:
Digital
Language:
English
Page count:
N/A - exact page count not stated for this edition
Searchability:
Text-searchable PDF with clickable bookmarks where provided
Coverage Areas
Engine mechanical:
Yes
Fuel and common-rail system:
Yes
Cooling and lubrication:
Yes
Electrical and sensors:
Yes
Diagnostic trouble codes:
Yes
Tightening torques and specifications:
Yes
📖 Manual Coverage
Mechanical Systems
Cylinder head and valvetrain:
Inspection, valve clearance, valve seat and guide service
Cylinder block and pistons:
Measurement, piston and ring servicing, liner data
Crankshaft and bearings:
Journal measurement and bearing selection
Camshaft and timing:
Timing gear train alignment and camshaft service
Turbocharger:
Removal, inspection, and refit
Exhaust and aftertreatment:
Manifold and exhaust system service
Fuel and Air
Common-rail pump:
Removal, installation, and timing position
Injectors:
Testing, removal, and installation
Fuel filter and lines:
Replacement and priming procedures
Air cleaner and intake:
Service and restriction checks
Charge-air cooler:
Inspection and cleaning
Lubrication and Cooling
Oil pump:
Inspection and service limits
Oil cooler:
Service and sealing
Water pump:
Replacement and drive belt routing
Thermostat:
Testing and replacement
Radiator and coolant circuit:
Flushing and refill procedure
Electrical and Diagnostics
Starting system:
Starter circuit testing
Charging system:
Alternator testing and replacement
Sensors:
Rail pressure, boost, coolant, and position sensors
ECU and wiring:
Connector pinouts and harness repair
Diagnostic codes:
Fault code retrieval and troubleshooting charts
Procedures and Reference
Disassembly and assembly:
Step-by-step with torque values
Specifications tables:
Clearances, wear limits, and capacities
Wiring diagrams:
System schematics and connector views
Parts information:
Component identification and part callouts (no retail pricing)
📊 Manual Specifications
File & Compatibility
File Format:
PDF (searchable, bookmarked, zoomable)
Compatibility:
Windows, macOS, Linux, iOS, and Android — any device with a PDF reader
Requirements:
A PDF reader application (e.g. Adobe Acrobat Reader, free)
Searchability:
Fully text searchable for fast lookup of any topic
Print & Binding
Print Quality:
High-resolution digital pages, printable at full clarity
Binding Type:
N/A — digital download, no physical binding
Paper Type:
N/A — digital download, no physical paper
⚙️ Engine Specifications
Primary Engine
Model:
Kubota V3800-CR-TE4B / V3800-CR-TIE4B
Configuration:
Inline four-cylinder, liquid-cooled diesel
Displacement:
3.769 L (230 cu in)
Bore x stroke:
N/A - confirm against the serial-specific specification table in the manual
Valvetrain:
Overhead valve, four valves per cylinder
Aspiration:
Turbocharged with charge-air cooling
Fuel system:
Common-rail direct injection with electronic control
Emission control:
Cooled exhaust gas recirculation and diesel oxidation catalyst / aftertreatment as fitted
Performance
Rated output:
N/A - varies by Hyundai machine rating; see the manual's application table
Rated speed:
N/A - governed speed is application-specific
Peak torque:
N/A - refer to published rating for the installed machine
Firing order:
1-3-4-2
Cooling system:
Pressurized, water-cooled with thermostat
🔧 Transmission
Installation Note
Transmission type:
N/A - this manual covers the engine only; the transmission is supplied by the machine builder
Engine-to-transmission interface:
Flywheel housing and coupling details covered in the engine installation section
Flywheel and damper:
Inspection and tightening specifications included
📐 Dimensions
Engine Dimensions
Length:
N/A - varies with installed accessories; measure the specific build
Width:
N/A - accessory-dependent
Height:
N/A - accessory-dependent
Dry weight:
N/A - varies by configuration and installed equipment
Service Capacities
Engine oil capacity:
N/A - confirm from the manual's capacity table for the exact sump fitted
Coolant capacity:
N/A - depends on the machine's radiator and circuit
Fuel system capacity:
N/A - machine-dependent
🛡️ Safety Features
Engine Protection
Automatic shutdown:
Low oil pressure and overheat protection as configured by the machine builder
Warning lamps:
Oil pressure, coolant temperature, and charge system indicators
Diagnostic monitoring:
ECU fault detection with stored codes
Service Safety
High-pressure fuel:
Common-rail system operates at high pressure; depressurize before service
Hot surfaces:
Allow turbocharger and exhaust to cool before work
Lifting:
Use rated lifting eyes and equipment
💡 Technology Features
Engine Control
Engine control unit:
Electronically governed common-rail management
Sensors:
Rail pressure, boost pressure, coolant temperature, and crankshaft position
Diagnostics:
Fault code retrieval and live data via service tooling
Machine Integration
Electrical interface:
Engine harness connects to the Hyundai machine harness
Instrumentation:
Machine gauge panel displays engine parameters
🔧 Maintenance
Service Intervals
Engine oil and filter:
Per the maintenance schedule table in the manual; shorten under severe duty
Fuel filter:
Replace at scheduled intervals and after fuel contamination
Air filter:
Clean or replace based on restriction indicator
Coolant:
Check concentration and condition at scheduled intervals
Valve clearance:
Inspect and adjust at the scheduled interval
Fluids
Engine oil:
Use the viscosity and API/CJ-4 class specified in the manual for the ambient range
Coolant:
Use the manufacturer-specified coolant mixture; do not mix incompatible types
Fuel:
Ultra-low-sulfur diesel meeting the manual's specification
Known Wear Items
Injectors:
Common-rail injectors are sensitive to fuel quality and contamination
Turbocharger:
Oil starvation and dirty intake air shorten service life
Belts and hoses:
Inspect for cracking and glazing
Gaskets and seals:
Replace during major disassembly
📚 Vehicle History
Brand Heritage
Manufacturer:
Kubota Corporation, Japan
Engine lineage:
V3800 series industrial diesel developed for off-highway and construction equipment
OEM application:
Supplied in Hyundai machinery and other industrial installations
Model Evolution
Generation:
Common-rail V3800-CR series replacing earlier mechanical-injection V3800 engines
Emissions development:
Common-rail injection and exhaust aftertreatment added to meet Tier 4 / Stage IIIB limits
Production location:
N/A - not stated for this engine build
🏆 Awards & Recognition
Model Recognition
Awards:
N/A - no specific industry award is documented for this engine variant
Reputation:
V3800 series engines are widely recognized for durability in industrial and construction service
Service support:
Wide parts and service availability through Kubota and Hyundai dealer networks

Delivery & file format

This is a digital PDF download, not a printed book. After payment the download link appears on your order confirmation page and is emailed to the address you entered. Files open in any PDF reader on phone, tablet or computer and can be printed.

Check the serial range before you buy

Manufacturers change procedures and part numbers by serial-number break. If your data plate shows a serial prefix that is not listed above, contact us with the model and serial number and we will confirm coverage before you order.

View full details
  • Instant download PDF link on your order page and by email right after payment.
  • Secure checkout Encrypted Shopify checkout — we never see your card.
  • Print-ready PDF Searchable text, print the pages you need for the workshop.
  • Phone, tablet, PC Open it in the cab, the workshop or the office.